YAWATA 307-16 is a basic coated, austenitic high-yielded electrode. The weld metal is tough with high tensile and elongation values, self-lifting slag, rust proof, wear resisting and crack-free.
YAWATA 308L-16 is a rutile high-alloy extra-low carbon electrode (ELC) for non-stabilized and stabilized Cr-Ni steels resistant to atmospheric corrosion of the 18%Cr-8%Ni type. Resistant to grain disintegration of operating temperatures up to 350℃. Smooth running, good striking and restriking, regular appearance, finely rippled, smooth junction, easy slag removal.
YAWATA 309L-16 is a lime-titania type stainless steel electrode. Low carbon 22%Cr-12%Ni deposited metal shows extremely high crack resistance due to its high ferrite content.
YAWATA 312-16 is a rutile type austenitic-ferritic electrode with a 25¡«30% ferrite content. The weld metal is extremely crack resistant and lends itself admirably to the welding of dissimilar and difficult to weld steels. It can be used for the welding of high nickel alloys without becoming fully austenitic due to nickel pick-up.
YAWATA 316L-16 is a rutile high-alloy extra-low carbon electrode (ELC) for non-stabilized and stabilized chromium-nickel steels resistant to atmospheric corrosion of the 18%Cr-12%Ni-2%Mo type. Resistant to grain disintegration of operating temperatures up to 350℃. Smooth running, good striking and restriking. Regular appearance. Finely rippled, smooth junction, easy slag removal.
YAWATA 7018 is an iron powder low hydrogen type electrode containing a large amount of iron powder in coating flux. Deposited metal gives excellent mechanical properties, crack resistance and X-ray quality. Weldability is good and high welding efficiency is obtained.
YAWATA 7024 is a rutile iron powder electrode combining a recovery of approximately 160% with fast burn off to give very good deposition rates. Other characteristics include self-lifting slag, smooth arc, with very little nonadherent spatters, instantaneous striking and re-striking, smooth bead appearance with fine neat ripples.
YAWATA CHAMFERTRODE electrodes are specially designed for powerfully effective cutting and grooving which can also be used for gouging and hole piercing. It gives a concentrated, forceful arc capable of penetrating plates up to 2.5 mm in thickness.
YAWATA FT-51 is a high rutile type electrode for all positions welding and assures easy operation even in vertical downward position. Spatters are less and bead appearance is beautiful. Shallow penetration minimizes distortion in the welding of thin plates.
YAWATA Ni Cast 55 is a graphite type electrode. Its Fe-Ni composit wire assures no excessive heating of electrode and no change of operational characteristics during welding. Deposited metal shows excellent mechanical properties and crack resistance.
YAWATA Ni Cast 98 is a graphite type electrode with a pure nickel core wire. Weld metal is not so hard and is easily machined. Arc is stable and slag is easy to remove. No preheating is required in general.
/__upload/PTSWelding/Catalogue/images/DATA-SFT-ZA-0-1--133--0000138058--2-1.jpg&MaxImageWidth=450&MaxImageHeigth=450 "Zoom into the product image")
